car-wash-owning
Unnamed
TalkCarWash Stats: 5702 users, 3557 posts, 14501 replies, 1316 classifieds, 3941 pictures, 2.5 Hours of Video
← Back to InBay Automatics

Mark vii rope breaking

1 reply created 5 months ago
posted by Ron Shook 5 months ago

The overhead rope that goes to the weight on the passenger side of the unit keeps breaking. Any advice for a remedy would be very grateful!

Replies

reply by M7T 4 months ago

Do you have a Softwash gantry?
If so, I assume you are referring to the roof bbrush kevlar belt that holds the counter weight.
Check guidance rollers bearings, clean the counter weight and lubricate with wd40 only the weight (not over the belt), clean and lubricate both deflection shaft bearings.
If the roof brush bounces too much over cars could cause also the belt to come out of place.

You could leave a reply if you were logged in.
car-wash-operating