car-wash-owning
Tcw_website_connect_760x90__1_
TalkCarWash Stats: 2966 users, 2520 posts, 11224 replies, 513 classifieds, 2118 pictures, 2.5 Hours of Video
← Back to InBay Automatics

Mars to ACW 5

6 replies created over 2 years ago
posted by br549 over 2 years ago

The stacker plug that is mentioned to plug in when Hameltons stacker is removed, is that a 9 way plug with two purple wires in it?

Replies

reply by MEP1 over 2 years ago

Yes.

reply by br549 over 2 years ago

Thanks MEP1

The problem is this Mars and Etowah white box converter, excepts the bill and credits the amount and then shuts down.
The controller saying it has a stacker problem. (quarters work fine)
Jim said Sat. that the hardware profile is good, via email.
Now I'm wondering if the purple wires are in the wrong position in the nine way.

reply by MEP1 over 2 years ago

That's the problem you'll have if you don't plug in the jumper. I rather doubt it's wired wrong, but the jumper wire could be broken.

reply by eaglecarwash over 2 years ago

Here are some pictures of the Stacker Bypass plug. Check the wiring on the harness for any loose or missing wires.

Bypass_plug_003
reply by eaglecarwash over 2 years ago

The Stacker Bypass plug jumpers the Brown wire and the White wire with a Black tracer.

Bypass_plug_004
reply by br549 over 2 years ago

The Brown wire and the White wire with a Black tracer was not connected correctly. Thanks everyone.

You could leave a reply if you were logged in.
car-wash-operating