Need some info on side washers SF1 mounting ...

I have a 12" and 6" top motor side washers they were attached to a front to back mitter I had but I replaced it with a new side to side mitter that didnt have attachments. I attached a pic of the newer side washers that have stand alone mini stands... anyone have any used stands? or know any bracket I can attach to my new mitter?

Are these washers welded to the stands or are they bolted? If bolted you could unbolt them and drill through your existing frame work and run a couple of bolts all the way through the 4x4 post. Although that seems like an awful lot of work when you could use the stands they came with and anchor them to the floor if you have the tunnel space.
Just my 2 cents. Jeremy

i'd show it to a local fabrication shop if you have one near you. see if they can make a bolt on bracket to mount to your 4*4's. just make sure if someone does that they weld the edges too. i had a hanna bolt on motor mount snap. so we had to replace it again. the 2nd time we welded it too.