Whose Talking
Last Active Members
Hydro -Spray
Hydro -Spray
Hydro -Spray
Glenn S
Glenn S
chad sanders
RL "Bud" Abraham
G C
RL "Bud" Abraham
Stan McFadden
Ken Booth
Joc Hardwick
Hydro -Spray
chad sanders
Ken LaPoint
John Doe
Val-Chem Solutions
Ken LaPoint
Tony Oneto
Steve Carmack
RL "Bud" Abraham
Jeremy Ussery
Martin L
danny daniele
Robert Roman
Tony F
Randy Ready
DK Sudzy
← Back to Tips & How To's
solenoids
posted by washout
over 5 years ago
When you install a new bronze fitted solenoid replace the 4 bonnet bolts with stainless steel bolts. Also put never seize between the solenoid coil and the bonnet shaft. Rotate the solenoid coil so that you can get access to all 4 bolts easily. The coils like to freeze up on the shaft and the galvy bolts rot away. Makes it real hard to replace a diaphragm or clean out the valve body.
Replies
You could leave a reply if you were logged in.
